| |
| Victor XL Plus |
| |
|
|
| |
Enertech's VICTOR XL PLUS generators gives consistent and repeatable output as required by the surgeon in different types of surgeries.
VICTOR XL PLUS electro surgery generators gives best price performance ratio in similar class of generators offered by other manufacturers and can be widely used in procedures including Urology, Gl, Gynaecologic, Orthopaedic. Thoracic and Plastic Surgery. |
| |
| Performance Features |
| » |
Pure Cut and Two Blend Modes gives the surgeon varying degree of Hemostasis in the cut mode. Blend 3 is endocut mode. |
| » |
True Spray Coag mode offers massive and rapid non-contact coagulation.Fulgurate Coag mode for sealing bleeders.Desiccate Coag mode for contact coagulation. |
| » |
Micro / Macro Bipolar Modes provides controlled desiccation without charring, adhesion and blanching of tissues with bipolar cut and coag facility. Bipolar cut mode allows bipolar cutting operations. |
| » |
Ninety Nine Programmable Modes provides memory features for repeatable surgery parameters without the need for adjustments during each surgeries. |
| » |
Separate Monopolar and Bipolar R.R output system allow two surgeons to work separately. |
| » |
Absolutely Safe as Isolated RF Output provides direct current return to the generator significantly reducing the risk of alternate site burns. |
| » |
Power-Limiting Output with Automatic Compensation Circuit provides more consistent performance over wide range of tissue impedance. |
| » |
Patient plate monitoring system for high operational safety. |
| » |
High speed Tissue response circuit adjusts the power for consistent performance. |
| » |
Switching power supply accepts the wide range of input voltage from 150 to 270 Volts and hence keep the output constant throughout the range. |
| » |
Highly Portable with weight of @ 3.8 kg. |
|
| Technical Specification |
| |
Max. Power (Watts) |
Rated Load (Ohms) |
| Enclosure |
Plastic |
- |
| Operating Frequency |
650 KHz |
- |
| Display |
7 Segment digital |
- |
| Program modes |
99 |
- |
| Monopolar Cut |
400W |
500 |
| Blend 1 |
250W |
500 |
| Blend 2 |
200W |
500 |
| Endocut |
200W |
500 |
| Spray |
150W |
500 |
| Fulguration |
120W |
500 |
| Desiccation / Soft. |
120W |
500 |
| Bipolar Coagulation Micro |
80W |
100 |
| Bipolar Coagulation Macro |
80W |
500 |
| Bipolar Cut |
99W |
500 |
| Dimension (W x H x D) |
@ 4.5" x 10" X 11" |
| Weight |
@ 3.8kg |
|
| Input Voltage |
170 to 260VAC 50 Hz |
|
| Standard Accessories |
| Double Pedal Foot Switch (Monopolar) |
- 1 no. |
| Single Pedal Foot Switch (Bipolar) |
- 1 no. |
| Silicon Rubber patient plate |
- 1 no. |
| Autoclavable handles |
- 1 no. |
| Set of Electrodes |
- 1 set. |
| Bipolar Forcep with cord |
- 1 set. |
| Hand pencil non- disposable |
- 1 no. |
|
|
|
| |
| |
|
| |
| Victor XL |
| |
|
| |
Enertech's VICTOR XL generators gives consistent and repeatable output as required by the surgeon in different types of surgeries.
VICTOR XL electro surgery generators gives best price performance ratio in similar class of generators offered by other manufacturers and can be widely used in procedures including Urology, Gl, Gynaecologic, Orthopaedic. Thoracic and Plastic Surgery. |
| |
| Performance Features |
| » |
Pure Cut and Two Blend Modes gives the surgeon varying degree of Hemostasis in the cut mode. Blend 3 is endocut mode. |
| » |
True Spray Coag mode offers massive and rapid non-contact coagulation Fulgurate Coag mode for sealing bleeders. Desiccate Coag mode for contact coagulation. |
| » |
Micro / Macro Bipolar Modes provides controlled desiccation without charring, adhesion and blanching of tissues with bipolar cut and coag facility. Bipolar cut mode allows bipolar cutting operations. |
| » |
Twenty Programmable Modes provides memory features for repeatable surgery parameters without the need for adjustments during each surgeries. |
| » |
Separate Monopolar and Bipolar R.R output system allow two surgeons to work separately. |
| » |
Absolutely Safe as Isolated R. F. Output provides direct current return to the generator significantly reducing the risk of alternate site burns. |
| » |
Power-Limiting Output with Automatic Compensation Circuit provides more consistent performance over wide range of tissue impedance. |
| » |
Patient plate monitoring system for high operational safety. |
| » |
High speed Tissue response circuit adjusts the power for consistent performance. |
| » |
Switching power supply accepts the wide range of input voltage from 150 to 270 Volts and hence keep the output constant throughout the range. |
| » |
Highly Portable with weight of @ 3.8 kg. |
|
|
| |
| Technical Specification |
| |
Max. Power (Watts) |
Rated Load (Ohms) |
| Enclosure |
Plastic |
- |
| Operating Frequency |
480 KHz |
- |
| Display |
7 Segment digital |
- |
| Program modes |
20 |
- |
| Monopolar Cut |
400W |
500 |
| Blend 1 |
250W |
500 |
| Blend 2 |
200W |
500 |
| Endocut |
200W |
500 |
| Spray |
150W |
500 |
| Fulguration |
120W |
500 |
| Desiccation / Soft. |
120W |
500 |
| Bipolar Coagulation Micro |
80W |
100 |
| Bipolar Coagulation Macro |
80W |
500 |
| Bipolar Cut |
99W |
500 |
| Dimension (W x H x D) |
@ 4.5" x 10" X 12" |
| Weight |
@ 3.8 kg |
|
| Input Voltage |
170 to 260VAC 50 Hz |
|
|
| |
| Standard Accessories |
| Double Pedal Foot Switch (Monopolar) |
- 1 no. |
| Single Pedal Foot Switch (Bipolar) |
- 1 no. |
| Silicon Rubber patient plate |
- 1 no. |
| Autoclavable handles |
- 1 no. |
| Set of Electrodes |
- 1 set. |
| Bipolar Forcep with cord |
- 1 set. |
| Hand pencil non- disposable |
- 1 no. |
|
|
| |
| |
|
| |
| E 400 Programmable |
| |
|
| |
Enertech’s E 400 Programmable generators gives consistent and repeatable output as required by the
surgeon in different types of surgeries.
E 400 Programmable electro surgery generators gives best price performance ratio in similar class of
generators offered by other manufacturers and can be widely used in procedures including Urology,
GI, Gynaecologic, Orthopaedic, Thoracic and Plastic Surgery. |
| |
| Performance Features |
| » |
Pure Cut Two Blend Modes gives the surgeon varying
degree of Hemostasis in the cut mode.
Endo cut mode is provided for added flexibility. |
| » |
True Spray Coag mode offers massive and rapid
non-contact coagulation.
Fulgurate Coag mode for sealing bleeders.
Desiccate Coag mode for contact coagulation. |
| » |
Micro / Macro Bipolar Modes provides controlled
desiccation without charring,adhesion and blanching of
tissues with bipolar cut and coag facility.
Bipolar cut mode allows bipolar cutting operations. |
| » |
Separate Monopolar and Bipolar R.F. output system allow two surgeons to work separately. |
| » |
Absolutely Safe as Isolated RF Output provides direct current return to the generator significantly reducing the risk
of alternate site burns. |
| » |
Power-Limiting Output with Automatic Compensation Circuit provides more consistent performance over wide range
of tissue impedance. |
| » |
Patient plate monitoring system for high operational safety. |
| » |
Ten Programmable Modes provides memory features for repeatable surgery parameters without the need for
adjustments during each surgeries. |
| » |
Micro Controller tissue response circuit network measures output impedance every 40 nano seconds and
automatically adjusts the power. |
| » |
Switching power supply accepts the wide range of input voltage from 150 to 270 Volts and hence keep the output
constant throughout the range. |
| » |
Highly Portable with weight of @ 5kg. |
|
|
| |
| Technical Specification |
| |
Max. Power (Watts) |
Rated Load (Ohms) |
| Operating Frequency |
480 KHz |
- |
| No. of program |
10 |
- |
| Display |
7 Segment digital |
- |
| Pure Cut |
400W |
500 |
| Blend 1 |
250W |
500 |
| Blend 2 |
200W |
500 |
| Endocut |
200W |
500 |
| Spray |
120W |
500 |
| Fulguration |
150W |
500 |
| Desiccation / Soft. |
100W |
500 |
| Bipolar Coagulation Micro |
80W |
100 |
| Bipolar Coagulation Macro |
80W |
500 |
| Bipolar Cut |
99W |
500 |
| Dimension (W x H x D) |
@ 4.5" x 10" X 11" |
| Weight |
@ 5 kg |
| Input Voltage |
170 to 260VAC 50 Hz |
|
|
| |
| Standard Accessories |
| Double Pedal Foot Switch (Monopolar) |
- 1 no. |
| Single Pedal Foot Switch (Bipolar) |
- 1 no. |
| S.S. Patient plate with cable o |
- 1 no. |
| Hand pencil disposable |
- 1 no. |
| Autoclavable chuck handle |
- 1 no. |
| Set of Electrode |
- 1 set. |
|
|
| |
| |
| |
|
| |
| E 400 Plus |
| |
|
| |
Enertech’s E 400 Plus generators gives consistent and repeatable output as required by the
surgeon in different types of surgeries.
E 400 Plus electro surgery generators gives best price performance ratio in similar class of generators offered by other manufacturers and can be widely used in procedures including
Urology, GI, Gynaecologic, Orthopaedic, Thoracic and Plastic Surgery. |
| |
| Performance Features |
| » |
Pure Cut Two Blend Modes gives the surgeon varying
degree of Hemostasis in the cut mode.
Endo cut mode is provided for added flexibility. |
| » |
True Spray Coag mode offers massive and rapid
non-contact coagulation.
Fulgurate Coag mode for sealing bleeders.
Desiccate Coag mode for contact coagulation. |
| » |
Micro / Macro Bipolar Modes provides controlled
desiccation without charring,adhesion and blanching of
tissues with bipolar cut and coag facility.
Bipolar cut mode allows bipolar cutting operations. |
| » |
Separate Monopolar and Bipolar R.F. output system allow two surgeons to work separately. |
| » |
Absolutely Safe as Isolated RF Output provides direct current return to the generator significantly reducing the risk
of alternate site burns. |
| » |
Power-Limiting Output with Automatic Compensation Circuit provides more consistent performance over wide range
of tissue impedance. |
| » |
Patient plate monitoring system for high operational safety. |
| » |
Micro Controller tissue response circuit network measures output impedance every 40 nano seconds and
automatically adjusts the power. |
| » |
Switching power supply accepts the wide range of input voltage from 150 to 270 Volts and hence keep the output
constant throughout the range. |
| » |
Highly Portable with weight of @ 5kg. |
|
|
| |
| Technical Specification |
| |
Max. Power (Watts) |
Rated Load (Ohms) |
| Operating Frequency |
480 KHz |
- |
| Display |
7 Segment digital |
- |
| Pure Cut |
400W |
500 |
| Blend 1 |
250W |
500 |
| Blend 2 |
200W |
500 |
| Endocut |
200W |
500 |
| Spray |
120W |
500 |
| Fulguration |
150W |
500 |
| Desiccation / Soft. |
100W |
500 |
| Bipolar Coagulation Micro |
80W |
100 |
| Bipolar Coagulation Macro |
80W |
500 |
| Dimension (W x H x D) |
@ 4.5" x 10" X 11" |
| Weight |
@ 5 kg |
| Input Voltage |
170 to 260VAC 50 Hz |
|
|
| |
| Standard Accessories |
| Double Pedal Foot Switch (Monopolar) |
- 1 no. |
| Single Pedal Foot Switch (Bipolar) |
- 1 no. |
| S.S. Patient plate with cable o |
- 1 no. |
| Hand pencil disposable |
- 1 no. |
| Autoclavable chuck handle |
- 1 no. |
| Set of Electrode |
- 1 set. |
|
|
| |
| |
|
| |
| E - 300 |
| |
|
| |
Enertech's E-300 generators gives consistent and repeatable output as required by the surgeon in
different types of surgeries.
E-300 electro surgery generators gives best price performance ratio in similar class of generators
offered by other manufacturers and can be widely used in procedures including Urology, GI, Gynaecologic, Orthopaedic, Thoracic and Plastic Surgery. |
| |
| Performance Features |
| » |
Pure Cut Two Blend Modes gives the surgeon varying
degree of Hemostasis in the cut mode. |
| » |
True Spray Coag mode offers massive and rapid noncontact
coagulation. Force Coag for low voltage contact
coagulation. Soft Coag mode delivers better coagulation
with less depth of Tissue Necrosis. |
| » |
Bipolar Mode provides controlled desiccation without
charring, adhesion and blanching of tissues with bipolar cut
and coag facility. |
| » |
POLYP CUT divides cutting into interval of cuts and pauses, e.g. in Polypectomy or papillotomy. Coagulation occurs during
each pause giving a supremely controlled cut with coagulation effects. |
| » |
Six Programmable Modes for Plastic mode provides memory features for repeatable surgery parameters without the need
for adjustments during each surgeries. |
| » |
Separate Monopolar and Bipolar R.F. output system allow two surgeons to work separately. |
| » |
Absolutely Safe as Isolated RF Output provides direct current return to the generator significantly reducing the risk of
alternate site burns. |
| » |
Patient plate monitoring circuit helps to prevent patient plate burns. |
| » |
Micro Controller tissue response circuit network measures output impedance every 40 nano seconds and automatically
adjusts the power. |
| » |
Power-Limiting Output with Automatic Compensation Circuit provides more consistent performance over wide range of
tissue impedance. |
| » |
Switching power supply accepts the wide range of input voltage from 150 to 270 Volts and hence keep the output constant
throughout the range. |
| » |
Highly Portable with weight of @ 5 kg. |
|
|
| |
| Technical Specification |
| Operating Frequency |
480 KHz |
| Program modes |
6 |
| Display |
7 Segment digital |
| Pure Auto Cut |
300W |
| Blend 1 |
200W |
| Blend 2 |
150W |
| Spray |
120W |
| Fulguration |
150W |
| Desiccation / Soft. |
80W |
| Bipolar Coagulation |
80W |
| Dimension (W x H x D) |
@ 4.5" x 10" X 12" |
| Weight |
@ 5 kg |
| Input Voltage |
170 to 260VAC 50 Hz |
|
|
| |
| Standard Accessories |
| Double Pedal Foot Switch Monopolar |
- 1 no. |
| Single Pedal Foot Switch Bipolar |
- 1 no. |
| S.S. Patient plate with cable o |
- 1 no. |
| Hand pencil disposable |
- 1 no. |
| Autoclavable chuck handle |
- 1 no. |
| Set of Electrode |
- 1 set. |
|
|
| |
| |
| |
|
| |
| Optima 300 |
| |
|
| |
Enertech’s Optima 300 generators gives consistent and repeatable output as required by the surgeon in
different types of surgeries.
Optima 300 electro surgery generators gives best price performance ratio in similar class of generators
offered by other manufacturers and can be widely used in procedures including Urology, GI, Gynaecologic,
Orthopaedic, Thoracic and Plastic Surgery. |
| |
| Performance Features |
| » |
Pure Cut Two Blend Modes gives the surgeon varying
degree of Hemostasis in the cut mode. |
| » |
True Spray Coag mode offers massive and rapid noncontact
coagulation. Pin Point Coag for small area coagulation. |
| » |
Effective bipolar output gives excellent result
In Laparoscopy. |
| » |
Separate Monopolar and Bipolar R.F. output system allow two surgeons to work separately. |
| » |
Absolutely Safe as Isolated RF Output provides direct current return to the generator significantly
reducing the risk of alternate site burns. |
| » |
Patient plate monitoring circuit helps to prevent patient plate burns. |
| » |
Power-Limiting Output with Automatic Compensation Circuit provides more consistent performance
over wide range of tissue impedance. |
| » |
Micro Controller tissue response circuit network measures output impedance every 40 nano
seconds and automatically adjusts the power. |
| » |
Switching power supply accepts the wide range of input voltage from 150 to 270 Volts and hence
keep the output constant throughout the range. |
| » |
Highly Portable with weight of @ 7 kg. |
|
|
| |
| Technical Specification |
| Operating Frequency |
480 KHz |
| Display |
7 Segment digital |
| Pure cut |
300W |
| Blend 1 |
200 W |
| Blend 2 |
150W |
| Blend 3 |
120W |
| Spray |
120W |
| Pin Point |
150W |
| Bipolar Coagulation |
80W |
| Dimension (W x H x D) |
@ 4.5" x 12" X 12" |
| Weight |
@ 7 kg |
| Input Voltage |
170 to 260VAC 50 Hz |
|
|
| |
| Standard Accessories |
| Double Pedal Foot Switch Monopolar |
- 1 no. |
| Single Pedal Foot Switch Bipolar |
- 1 no. |
| S.S. Patient plate with cable o |
- 1 no. |
| Hand pencil disposable |
- 1 no. |
| Autoclavable chuck handle |
- 1 no. |
| Set of Electrode |
- 1 set. |
|
|
| |
| |
| |
|
| |
| SSE-TUR |
| |
|
| |
Enertech’s SSE-TUR generators gives consistent and repeatable output as required by the surgeon
in different types of surgeries.
SSE-TUR electro surgery generators gives best price performance ratio in similar class of generators
offered by other manufacturers and can be widely used in procedures including Urology, GI,
Gynaecologic, Orthopaedic, Thoracic and Plastic Surgery. |
| |
| Performance Features |
| » |
Pure Cut Two Blend Modes gives the surgeon varying
degree of Hemostasis in the cut mode. |
| » |
True Spray Coag mode offers massive and rapid
non-contact coagulation.
Fulgurate Coag mode for sealing bleeders.
Desiccate Coag mode for contact coagulation. |
| » |
Bipolar Mode provides controlled desiccation without charring, adhesion and blanching of tissues. |
| » |
Separate Monopolar and Bipolar R.F. output system allow two surgeons to work separately. |
| » |
Absolutely Safe as Isolated RF Output provides direct current return to the generator significantly
reducing the risk of alternate site burns. |
| » |
Patient plate monitoring system for high operational safety. |
| » |
Power-Limiting Output with Automatic Compensation Circuit provides more consistent performance
over wide range of tissue impedance. |
| » |
Switching power supply accepts the wide range of input voltage from 150 to 270 Volts and hence keep the
output constant throughout the range. |
| » |
Highly Portable with weight of @ 6kg. |
|
|
| |
| Technical Specification |
| |
Max. Power (Watts) |
Rated Load (Ohms) |
| Operating Frequency |
480 KHz |
- |
| Monopolar |
400W |
500 |
| Blend 1 |
250W |
500 |
| Blend 2 |
200W |
500 |
| Spray/Fulguration |
120W |
500 |
| Desiccation |
100W |
500 |
| Bipolar Coagulation |
80W |
500 |
| Dimension (W x H x D) |
@ 4.5" x 13.5" X 11" |
| Weight |
@ 6 kg |
| Input Voltage |
170 to 260VAC 50 Hz |
|
|
| |
| Standard Accessories |
| Double Pedal Foot Switch (Monopolar) |
- 1 no. |
| Single Pedal Foot Switch (Bipolar) |
- 1 no. |
| S.S. Patient plate with cable o |
- 1 no. |
| Hand pencil disposable |
- 1 no. |
| Autoclavable chuck handle |
- 1 no. |
| Set of Electrode |
- 1 set. |
|
|
| |
| |
| |
|
| |
| Simplex 250 |
| |
|
| |
Enertech’s Simplex 250 generators gives consistent and repeatable output as required by the surgeon
in different types of surgeries.
Simplex 250 electro surgery generators gives best price performance ratio in similar class of generators
offered by other manufacturers and can be widely used in general procedures. |
| |
| Performance Features |
| » |
Pure Cut gives the surgeon powerful and smooth
cutting action. |
| » |
Coagulation is suitable for contact and non-contact
operation. |
| » |
Bipolar output is suitable for gentle bipolar effect
in all types of surgeries. |
| » |
Separate Monopolar and Bipolar R.F. output system allow two surgeons to work separately. |
| » |
Absolutely Safe as Isolated RF Output provides direct current return to the generator significantly reducing the
risk of alternate site burns. |
| » |
Power-Limiting Output with Automatic Compensation Circuit provides more consistent performance over wide
range of tissue impedance. |
| » |
Switching power supply accepts the wide range of input voltage from 150 to 270 Volts and hence keep the
output constant throughout the range. |
| » |
Highly Portable with weight of @ 5 kg. |
|
|
| |
| Technical Specification |
| Operating Frequency |
above 480 KHz |
| Pure cut |
250W |
| Coagulation |
120W |
| Bipolar |
80W |
| Dimension (W x H x D) |
@ 3.5” x13” x 12” |
| Weight |
@ 5 kg |
| Input Voltage |
170 to 260VAC 50 Hz |
|
|
| |
| Standard Accessories |
| Double Pedal Foot Switch (Monopolar) |
- 1 no. |
| S.S. Patient plate with cable o |
- 1 no. |
| Hand pencil disposable |
- 1 no. |
| Autoclavable chuck handle |
- 1 no. |
| Set of Electrode |
- 1 set. |
|
|
| |
|
| |