| |
 |
|
| |
The ENCO2-30H is a complete new designed line of CO2 insufflator with outstanding technical features. The unit is controlled by microprocessor of the latest generation. Stable pressure balance in the abdomen is guaranteed by high gas flow performance and low insufflation pressure. |
| |
| Performance Features |
| » |
Advance Flow Control: The ENCO2-30H
stands for AFC (advance flow control
insufflation) for precise and safe gas flow control. |
| » |
Software : Software controlled pressure
release mechanism prevents dangerous
pressure build up in the abdomen when
using such apparatus as laser or argon
beamers. |
| » |
Safety : Automatic self check, activated each time unit is switched on. makes sure all electronic and pneumatic components are in good running order. |
| » |
System Gas Heater : This unit comes with build in high efficiency gas heater. The gas heater is pre adjusted and works on a plug and play basis fully automatically. |
| » |
On Screen Data Display : Four line LCD display can provide information on
- Operating Parameters
- Operating Instructions
- Fault Indications
|
|
|
|
| |
| Technical Specification |
| Insufflation pressure |
0 - 30 mm Hg |
| Display |
4 Line LCD |
| Dimension ( W x H x D ) |
290 mm x 105 mm x 260 mm |
| Weight |
2 kg |
| Gas |
CO2 (Medical) |
| Gas Connection |
UNF 7/16" |
| Power Consumption |
15 Watts Maximum |
| Input Pressure Minimum |
1 Bar |
| Input Pressure Maximum |
10 Bar |
| Output Connection |
4 to 5 mm ID tube |
| Flow Rate Setting |
1 to 30 Ltr/min. |
| Keyboard |
Feather Touch |
| Gas Warmer |
Builtin |
| Manufactured and tested acc to std. |
IEC 601-1 / EN 60601-1 |
| Input Supply Voltage |
230 VAC ± 15% @ 50 / 60 Hz (110 V optional) |
|
|
| |
| Standard Accessories |
| Silicone Patient Tube with Connector |
1 no. |
| Inlet Pressure Regulator |
1 no. |
| High Pressure Inlet Tube |
1 no. |
| Spanner |
1 no. |
|
|
| |
| Optional Accessories |
| Autocalvable 2 micron filter Assembly |
| Spare Filter |
|
|
| |
|
| |
